Skip to main content

August Test

Fitter Exam Test- Aug

All Questions are compulsory. Marks= 30
  1. One micrometer (U) is equal to...

    2. 0.1mm
    0.01mm
    0.001mm
    0.0001mm

  2. The caliper meant for measuring the width of a slot is...

    3. Odd leg caliper
    Outside caliper
    Jenny caliper
    Inside caliper

  3. For cutting thin tubing, the most suitable pitch of the hacksaw blade is...

    4. 1.8mm
    1.4mm
    1mm
    0.8mm

  4. For cutting solid brass, the most suitable pitch of the hacksaw blade is...

    5. 1.8mm
    1.4mm
    1mm
    0.8mm

  5. A new hacksaw blade after a few strokes becomes loose because of the...

    6. Stretching of the blade
    Wing-nut threads being worn out
    Wrong pitch of the blade
    Improper selection of the set of saws.

  6. While cutting small diameter pipes, it is advisable to watch regularly and ensure that...

    7. The cut is along the curved line
    More saw teeth are in contract
    The work is not overheated
    Proper balancing of hacksaw is maintained

  7. The vice clamps are used to...

    8. Protect hard jaws
    Clamp the work pieces rigidly
    Protect the finished surfaces
    Prevent the movable jaw being filed

  8. The reference surface during marking is provided by the...

    9. Surface gauge
    Workpiece
    Drawing of the work
    Marking table surface

  9. The size of an engineer’s vice is specified by the...

    10. Length of the movable jaw
    Width of the jaws
    Height of the vice
    Maximum opening of the jaws

  10. The part of the universal surface gauge which helps to draw a parallel line along a datum edge is

    11. Rocker arm
    Snug
    Fine adjustment screw
    Guide pins

  11. Scribers are made of...

    12. Mild steel
    High carbon steel
    Brass
    Cast iron

  12. Portion of the hammer used for fixing the handle is...

    13. Face
    Peen
    Cheek
    Eye hole

  13. Weight of the hammer for the marking purpose is...

    14. 250g
    500g
    1 kg
    2 kgs

  14. The size of the dividers are specified by the...

    15. Total length of the legs
    Distance between the points when fully opened
    Length of legs without the points
    Distance between the pivot and the point

  15. The taper shank drills are held on the machine by means of...

    16. Chucks
    Sleeves
    Drift
    Vice

Comments

Post a Comment

Popular posts from this blog

Here’s a Mini Excavator Maintenance Schedule + Spring Checkup Tips

Get your compact excavator ready for the busy work season with advice from Takeuchi To view this email as a web page, click here. Here’s a Mini Excavator Maintenance Schedule + Spring Checkup Tips Compact or mini excavators have perhaps never been as popular as they are right now. While these handy little dynamos were originally designed for digging and trenching, manufacturers have increased their hydraulic flows and coupler options, making mini excavators compatible with more attachments. Now, operators can use them for many different...
Post a Comment
Read more

A Complete Guide to Buying a Compact Excavator

The North American compact excavator market was comprised of over 80,0000 units sold in 2023, an inc To view this email as a web page, click here. A Complete Guide to Buying and Renting a Compact Excavator in 2024 ...
Post a Comment
Read more

Versus! Skid Steer Vs. Track Loader, Tires Vs. Tracks, Radial Vs. Vertical, Standard Vs. High Flow

Case CE discusses the differences between machines to make sure you're in the right one To view this email as a web page, click here. A monthly newsletter by Compact Equipment dedicated to owners and operators of skid steers and track loaders. ...
Post a Comment
Read more